camspecs.gif (20202 bytes)

Web Cams

Valve Lash .006 intake & exhaust

Web Cams are here for Comparison only, I don't recomend them to anyone... there hardness wears off very fast and Web won't do anything about it. Check out Hayabusa.org and check what they say about Web and there cams...

SUZUKI GSX-R 750 / 1100 (1986-1990) 16v, BANDIT 1200   96 to 03
VALVE
LIFT
DURATION
IN DEGREES
DURATION
@.050 DEGREES
GRIND
NUMBER
DESCRIPTION REGRIND HARD
WELD
NEW
CAM
.330 266 240 223

Bolt-in performance cams for stock 750cc. Hardwelded rockers highly recommended!

N/A

.362/.330

255/266

230/240

453/223

TURBO profile increases power throughout the RPM. Hardwelded rockers highly recommended!

N/A

.370/.330 270/266 246/240 236/223

Offers increased mid and upper end power for 750 cc road racing. Performance valve springs required. Hardwelded rockers recommended!

N/A
.370 270 246 236

Improves mid range and top end power. Hot street-strip. Must use performance valve springs. Hardwelded rockers recommended!

N/A
.380 281 256 202

Good mid and upper end power for large displacement racing engines, Must use racing springs and shortened guides. Hardwelded rockers recommended!

N/A
.400 280 256 479

Good mid and upper end power for large displacement racing engines. Must use racing springs and shortened guides. Hardwelded rockers recommended!

N/A

.425

272

248

267

High lift, short duration profile designed for drag race application. Must use racing springs and shortened guides. Hardwelded rockers recommended!

N/A

.425/.410

287/268

262/246

257/263

Racing profile for large displacement 1400cc+. Hardwelded rockers recommended!

N/A

 

Cam Motion Cams

1-225-926-6110

Valve Lash .006 to .008 Always specified X behind grind # for Gsxr Motors

Suzuki GS 750, GS 1100, & Gsxr (4 Valve)
Grind # Valve LIft DURATION

.040 / .050

Lobe Center Event Timing Intake Event Timing Exhaust Decription
G2 .330 246/240 110

13/53

53/13 Drop In
G3 .345 260/256 110 20/60

60/20

General Purpose

G4 .355 262/256 110

21/61

61/21
G5 .360 266/262 110

23/63

63/23
G7

G9

.380

.410

269

258

110

110

19/59 64/25
G8 .400 253/248 110 16/57 57/16
G10 .315 236/228 110 8/48 48/8
G11 .460 256/248 110 18/58 58/18
G12 .315 232/226 110 6/46 46/6
G13 .420 262/256 110 21/61 61/21
G14 .440 268/262 110 24/64 64/24
G15 .350 252/246 110 16/56 56/16
G16 .430 258/252 110 19/59 59/19
G17 .420 268/262 110 24/64 64/24
G18 .425 256/250 110 18/58 58/18
G19 .420 260/254 110 20/60 60/20
G20 .450 256/250 110 18/58 58/18
G21 .380 250/244 110 15/55 55/15
G22 .420 252/246 110 16/56 56/16
G23 .450 256/250 110 18/58 58/18
G24 .450 244/238 110 12/52 52/12
G25 .350 246/240 110 13/53 53/13
G26 .440 264/258 110 22/62 62/22
G27 .475 262/256 110 21/61 61/21
G28 .380 242/236 110 11/51 51/11
G30 .475 269/262 110 25/64 64/25
G39 .406 254/248 110 17/57 57/17
G42 .416 257/251 110 19/59 59/19

Megacycle Cams

VALVE
LIFT
DURATION
@.040
DEGREES
DURATION
@.050 DEGREES
GRIND
NUMBER
DESCRIPTION REGRIND
.362 241 235 395HP-1 More Mid and Topend Yes

.341

242

236

395HP-2

More Mid and Topend Yes
.346 247 241 B12C-IN Gsxr Drop In Cams New
.331 245 236 B12C-EX Gsxr Drop In Cams New

88 OEM Gsxr 750 Cam Specs They have slightly larger specs than the rest of the OEM Suzuki Cams

.355 248 244 OEM Int More TopEnd and Mid New
.334 242 238 OEM Exh More TopEnd and Mid New


Note! for stock or lower Compression motors the GSX-R drop ins work best.

Gsxr style Hard Welded Rockers, For Bandit, Katana, Gsxr's

hardrockers.gif (7926 bytes)

Mainmenu.gif (833 bytes)